Fluorine-Lined Single-Seat Control Valve
The fluorine-lined single-seat control valve is a bellows-sealed single-seat control valve. The parts in contact with the medium are manufactured using high-pressure injection molding technology and lined with PTFE (F46), which is resistant to strong corrosive media such as hydrochloric acid, sulfuric acid, nitric acid, hydrofluoric acid, and has excellent aging resistance.
It also uses a PTFE bellows seal. This valve is widely used in various processes for controlling strong corrosive media like acids and alkalis, as well as toxic and volatile gases and liquids.
Performance
- Flow characteristics: Linear, Equal percentage, Quick opening
- Adjustable range: 50:1 (when CV <6.3, 30:1)
- Rated CV value: Equal percentage CV 1.6~630, Linear CV 1.8~690
- Allowable leakage rate: Hard seal: Class IV (0.01% of valve rated capacity) Soft seal: Class VI (Bubble tight)
- Leakage standard: GB/T 4213
Actuator Selection
| Pneumatic Diaphragm Actuator | Fully Electronic Electric Actuator
|
| Multi-spring Type | Integrated Smart Type with Internal Control Box
|
Application | Regulation, On/Off | Regulation |
Air Supply Pressure/Voltage | Supply Pressure (Spring Range)） 140(20-100) Kpa G 240(400-200) Kpa G 280(80-240) Kpa G
| Power Supply AC 200 V±10% 50Hz or Power Supply AC 380 V±10% 50Hz |
Connection | Air pipe connection RC1/4 | Standard: Cable entry 2-PE (G1/2″) Explosion-proof: Protective sleeve PE (3/4″) can be installed
|
Direct Action | Increasing air pressure moves stem downward, valve closes | Increasing input signal moves stem downward, valve closes |
Reverse Action | Increasing air pressure moves stem upward, valve opens | Increasing input signal moves stem upward, valve opens |
Hysteresis | ≤1%FS (with positioner) | ≤0.8%FS |
Linearity | 2%FS (with positioner) | ≤±1%FS |
Ambient Temperature | -10°C ~+70°C | Standard type: -10°C ~ +60°C With space heater: -35°C ~ +60°C Explosion-proof type: -10°C ~ +40°C |
Surface Coating | Green, acrylic polyurethane enamel | Blue, acrylic polyurethane enamel
|
Optional Accessories | Electric (pneumatic) valve positioner, filter regulator, valve transmitter, solenoid valve, limit switch | Space heater |
Standard Specifications
Valve body type | Straight-through cast globe valve body |
Valve plug type | Unbalanced single-seat fluorine-lined plunger plug |
Nominal diameter | DN20~150 NPS 3/4″~6″ |
Nominal pressure | PN16~25, CLASS 150LB~300LB |
Connection type | Flange FF, RF, MF, RTJ; Welding SW, BW |
Face-to-face dimension | Complies with IEC 60534 |
Bonnet types | Standard type (-5°C~230°C); Extended bonnet with cooling fins (for temperatures above 230°C); Low-temperature extended type (-196°C~-45°C); Bellows sealed type, Jacketed type |
Packing | V-ring PTFE packing, flexible graphite packing, etc. |
Gasket | Metal-reinforced graphite gasket |
Actuator | Pneumatic multi-spring diaphragm actuator, piston actuator, electric smart actuator |
Surface coating | Green acrylic polyurethane paint |
Special Specifications
| Special inspections | Body material penetrant testing (PT), radiographic testing (RT), flow characteristic test, low-temperature test. |
| Special treatments | Nitriding treatment for internal parts, hard alloy coating for sealing parts |
| Special cleaning | Completely oil-free, dehydration treatment |
| Special specifications | Special piping or special air fittings, vacuum service conditions, stainless steel fasteners, special coatings |
| Special dimensions | Customized according to user’s structural length or external dimensions |
Request a FREE quote
we look forward to collaborating with you.
